The CWW-N150 Window Wall manufacturer from China CAS FACADE CO.LTD

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

stainless steel balcony balustrade

Glass wall with window system CWW-N15 is similar to unitized curtain wall system, but are generally less sophisticated. These glass window wall systems are common on small and medium sized buildings. Like curtain walls, window glass wall panels are largely prefabricated off-site (commonly in China) and shipped to site. They are normally installed sequentially, but installation can potentially take place over a number of floor at once. Generally window wall panels are installed between each single floor(it is supported by the slab below and above), and more flexible than unitized curtain wall.

Overview of CWW-N150 Window Wall

System:	Window Wall(Non Thermal Break)
Model No.:	CWW-N150
Material:	Aluminum Alloy/Glass/Aluminum Sheet/Aluminum Composite Panel/Galvanized Sheet
Glass Type:	Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak
Cooperated Glass Brand:	Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass
Surface Treatment:	Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain
Profile Brand:	6063-T5/6063-T6
Themral Profile:	Non-Thermal Break
Standards:	In Complianca With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO
Application:	Residential Apartment,Villa/Commercial Hotel,Mall,Office,Public Organization
System Customziation:	Available

Data of CWW-N150 Window Wall

Testing Data of CWW-N150 Window Wall

Test	Pressure	Results
Preloading(Clause 8.2.2 of AS/NZS4284:2008)	+2.58kpa	No separation, plastic deformations or deleterious was observed
Preloading(Clause 8.2.2 of AS/NZS4284:2008)	-2.58kpa
Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008)	+774kPa	No water leakage was observed.
Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008)	387-774-387 (Pa)	No water leakage was observed.
	516-1032-516 (Pa)
	774-1548-774 (Pa)
Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008)	+2.58kpa	During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits.
	-2.58kpa
Operating force test (AS 2047-2014)	--	The operating force was within the allowable value.
Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008)	+/-150Pa	The rate of air leakage of the specimen was within the allowable values.
Water Penetration Test under Static Water Penetration Test under Static 4284:2008)	+774Pa	No water leakage was observed.
Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008)	387-774-387 (Pa)	No water leakage was observed.
	516-1032-516 (Pa)
	774-1548-774 (Pa)
Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008)	+4.00kpa	No collapse of the test specimen was observed under the specified pressure.
	-4.00kpa

Thermal Data of CWW-N150 Window Wall

NFRC procedures	NFRC100SB, NFRC200-2010 and NFRC500-2010
Software tools:	THERM 7.4.3.0 and WINDOW 7.4.6.0
Configuration	6mm LB13-45#2HS+12AR+6mm Clear HST
Panel Dimension	1700mm Wide x 2750mm High
Frame	Painted Aluminum
Panel U-value	3.185W/m2k
Visible Light Transmission	0.301
Condensation Resistant	34.1

Frame Data of CWW-N150 Window Wall

Parts Location	Frame Area/m2	Edge Area/m2	U-Value(Frame) W/m2k	U-Value(Edge) W/m2k
Left Header	0.0650	0.0450	11.7187	1.8571
Left Jamb	0.2140	0.1610	11.6815	1.8544
Right Header	0.0650	0.0450	11.7187	1.8571
Mullion	0.1820	0.3150	6.2420	1.4047
Right Jamb	0.2140	0.1610	11.6815	1.8544
Left sill	0.0530	0.0450	14.7773	1.9316
Right sill	0.0530	0.0450	14.7773	1.9316

Glass Data of CWW-N150 Window Wall

Glass Data: 6mm LB13-45#2HS+12AR+6mm Clear HST
Visible Light			SHGC	SC	NFRC U-value W/m3k(Argon)		STC
T%	R-out%	R-in%			Winter	Summer
40	20	13		0.26	1.43	1.36	36

Benefit of CWW-N150 Window Wall

Flexible for different buildings

Reduction of installation difficulty

Cost efficient

Shorter project schedule

A expanded view for daily routine

Stable themral performance

Minimum after sales service & maintaining

Increased comfort level

Configuration of CWW-N150 Window Wall

Recommended CAS Facade Products

Our products are designed to snap together perfectly, organically or with the help of couplers. This ensures a streamline design throughout your project. Below is a list of compatible products.

As one of facade engineering firms, we can offer sorts of related products for sale, if you have needs, please contact us.